Our patented Side Post Battery Disconnect switch is designed to be used with General Motors style batteries with the connections on the side. A simple twist of a knob provides a convenient way to quickly disconnect and reconnect…
Fully Automatic - Will keep your battery fully charged without over charging. The on-board microprocessor turns the charger on and off based on your battery's demands. It does so automatically, every few milliseconds.
Designed…
New solid state technology for smooth gauge performance
and no adjustment is needed. Originals use mechanical contacts
that open & close causing gauges to fluctuate and adjusted
manually with a screw driver.…
Manufactured by Nu-Rex, this handy tool makes timing the Model A a breeze! Simply insert your timing pin and rotate the cam using this wrench until it rests against the specified contact on the distributor body and your done! Instructions…
New solid state technology for smooth gauge performance
and no adjustment is needed. Originals use mechanical contacts
that open & close causing gauges to fluctuate and adjusted
manually with a screw driver.…
This is that nifty little part that is located on the back of your instrument cluster. When it goes bad all your gauges will give erroneous readings except your fuel gauge.
…
Mounts on the valve cover
Keeps spark plugs wires together and away from other engine components
Made of durable black ABS plastic
Sized to fit 7mm or 8mm spark plug wires
…
Floating separator may be placed where needed to organize plug wire layout
Keeps spark plugs wires together and away from other engine components
Made of durable black ABS plastic
Sized to fit 7mm or 8mm spark plug wires
…
Attach this to the battery post and when you leave the car, unscrew the knob. It is a good safety item that disconnects electrical current, eliminating theft, battery drain and fires.
…
This is a modern type coil wire that has the ends crimped in place so you're sure you have a good connection. Also has rubber boot installed. "Genuine Nu-Rex". U.S.A.…
Stamped steel battery tray used on 1961/1964 Galaxie big block models is now available. An accurate reproduction made in the original huge steel. Measures 7 x 15.
…
If you are going for 100% authenticity, these are the bronze plug connectors that you will need. This style was used from the beginning of production until May of 1930. Sold in sets of 4. U.S.A.…
Strap attaches to right side fender brace and provides a sleeve for the hand crank handle to slide into. Keeps the hand crank from moving around. Made of black leather with a nickel buckle. U.S.A.…
After years of being off the market Scott Drake brings back the original style coil bracket. We used the specifications from the original Ford print to produce exact details. We made our bracket capable of holding the smaller coils on the…
Correct stamped steel battery tray hold down bracket for 1960/1966 models of Ranchero, Falcon and Comet with 40 and 45 amp batteries. Made to match the original Ford part exactly and finished in original semi-gloss black paint.
…
All terminals, boots, heads and mouldings have been duplicated with exacting details. The wire insulation is original neoprene rubber. The set includes positive, negative and starter cables. 1965 - 1969 cars also used a separate…