Axle is made of 2" tubing while the ends are CNC milled solid steel. Axles may require the steering arm to be modified to accept tie rods or other parts. U-bolts are not included. Some modifications may be required to obtain proper fit.
Additional Information
Technical Specifications
King pin to king pin centers measurement is 50.5"
Axle accepts a 1-3/4" wide spring
Spring pad center-to-center measurement is 26.75"
Spring pad width is 29.072" center to center of the outer U-bolt holes
6" drop measured from spring pad to spindle boss center
Center to center of u-bolt holes is 2. 30" side to side
Axle will provide a camber reading of -1.5 degrees
Axle Kingpin Boss Height: 2-7/16" (2.438")
Center to center of u-bolt holes front to rear is 3.195"
Chevrolet Truck Applications
1947 - 1954 Chevrolet Truck 3100
GMC Truck Applications
1952 - 1952 GMC 100 Base
1951 - 1954 GMC 100
1947 - 1954 GMC 100-22
1953 - 1954 GMC 100-24
1952 - 1953 GMC 102-22
1951 - 1951 GMC 150
1951 - 1951 GMC 150-22
1947 - 1954 GMC Truck
Vehicle Fitment:
The Vehicle Fitment Guide is to be used as a general reference. The data has been provided by our suppliers and manufacturers and may contain errors or incorrect data. Always refer to a professional to verify correct fitment for your vehicle.
