After years of use your trunk area is probably in poor condition due to water damage or other factors. If you are replacing your trunk pan then spraying the trunk is a must, even if you're installing a trunk mat. This is the clear topcoat that must be used to seal the spatter coat. Comes in a 16 Oz. Aerosol Can (Net Wt. 12 Oz.). This top coat can be used with virtually any vehicle. First, clean the trunk area and paint with trunk spatter paint. After drying, use the topcoat to seal the spatter paint and make your trunk look new again!
Note: Ships via ground freight only within the continental USA. Not available for air freight delivery.
OER® was established in the early 1980's to manufacture original equipment reproductions where every part is meticulously reproduced to exact factory specifications. All OER® parts are reverse engineered or manufactured using original blueprints when available to ensure the closest possible reproduction available on the market. When available, original factory tooling is utilized to insure complete originality. Our mission is to supply the highest quality parts available for the enthusiast and serious restorer. Whether you're a serious restorer, or just someone who wants a replacement part for your classic vehicle, OER® is the source for the finest quality parts on the market. Today, OER® is the most recognized brand in automotive restoration parts. Choose OER® for all your restoration needs.
Many OER® products are officially licensed by General Motors and the Chrysler Group ensuring the quality and authenticity of these products. The GM Restoration Parts logo and the MOPAR Authentic Restoration Product logo are the true signs of quality. OER® is licensed by GM and the Chrysler Group as an official restoration parts manufacturer.
| Height | 8 in |
| Length | 3 in |
| Weight | 1 lbs |
| Width | 3 in |
