This socket has a flared shoulder at one end to hold it in place. The flared end is captivated between the inside of the headlamp bucket and the base plate that is held in place with 6 rivets. The socket protrudes inward and is what holds the headlamp socket in place that pokes out the bottom of the headlamp. You'll need a set of our A-13011-MB (screws that look like rivets) to re-install the headlamp base plate. Sold individually. U.S.A.11/16" I.D. socket holder was used on the 1928-January of 1929 headlamp buckets.
Vehicle Fitment:
The Vehicle Fitment Guide is to be used as a general reference. The data has been provided by our suppliers and manufacturers and may contain errors or incorrect data. Always refer to a professional to verify correct fitment for your vehicle.
| Make |
Model |
Years |
| Ford |
Model A |
1928 |
